[pianotech] Tuning pin height

[Joe Goss]

Linn, hi, being the super sleuth that I am I found the bag of needle 
holders, so I sent your order out in today's mail. I am sending you the 
tracking numbers for it: 0307 1790 0004 8373 9742. Thanks again for the 
order. Penny Goss.
Joe Goss BSMusEd MMusEd RPT
imatunr at srvinet.com
www.mothergoosetools.com
----- Original Message ----- 
From: "Jon Page" <jonpage at comcast.net>
To: <pianotech at ptg.org>
Sent: Monday, October 05, 2009 3:56 PM
Subject: Re: [pianotech] Tuning pin height


> In an effort to raise the abilities of learning technicians
> it is a little disconcerting to find some suggesting not to strive
> for the best possible results in every aspect of our trade.
>
> Although I have found that unevenly placed beckets and loose
> coils do not necessarily lend to unstable tuning, leaving such does
> demonstrate a lack of craftsmanship.
> -- 
>
> Regards,
>
> Jon Page