[pianotech] pick-a-little-talk-a-little

[Joe Goss]

Shakespeare may have said it best "Much to do about nothing."
Joe Goss BSMusEd MMusEd RPT
imatunr at srvinet.com
www.mothergoosetools.com
----- Original Message ----- 
From: "Dempsey Jr., Paul E" <dempsey at marshall.edu>
To: <pianotech at ptg.org>
Sent: Tuesday, October 06, 2009 10:15 AM
Subject: [pianotech] pick-a-little-talk-a-little


My, my, my. Who would have thought that there would be this much to say 
about beckets?
When I was 17, one of my mentors was Mr. U. Glenn Jeffers, who was a former 
VP of the old NAPT, or was it ASPT? Don't matter. By then it was PTG and he 
was in that.

He was the first person to say to me that one of the highest levels of 
craftsmanship was to have all the beckets at the same position...preferably, 
at three o'clock. Being a neophyte I took him at his word and have spent the 
last 45 YEARS trying to get all my beckets to lie at 3:00. A frustrating 45 
years.

I have re-strung hundreds of pianos, large and small, upright and grand, 
countless single string replacements, and not one of them have had every 
becket end up at the magic 3:00 position.

Mow, many have, many at 2:00 and 1:00,1:30, 3:20, even 4:30.
Failure after failure. Woe.

At least they always end up on the right hand side of the pin, always the 
correct number of coils, coils always tight and square to the pin, excellent 
torque....but those freakin' beckets.

I probably would have shot myself in the eye by now except, shortly after 
Mr. Jeffers'
pronouncement; I learned to think for myself.


Precision placement of the beckets is nice if you can get it. If you're 
compelled for it, go for it. I don't think it means squat.

I just replaced a set of bass strings on a Yamaha grand that the owner had 
killed with Pledge or something. I looked at every becket on the factory 
stringing and they all were in the 1:00 to 4:00 position.

My new Bass strings were all in the 1:00 to 3:00 spot.

I doubt that the customer will notice. I don't remember ever having a client 
even say the word becket.








Paul E. Dempsey, RPT
Piano Technician Sr.
Marshall University
Huntington, WV
304-696-5418
304-617-1149