[pianotech] Stringing question and puzzler for the day

[Joe Goss]

Hi,
I  SUSPECT THAT THE SIDE BEARING ON THE BRIDGE PIN WOULD CHANGE IF YOU FOLLOWED NORMAL PROCEDURE.
Not shouting, caps locked on >g<
Joe Goss BSMusEd MMusEd RPT
imatunr at srvinet.com
www.mothergoosetools.com
  ----- Original Message ----- 
  From: Stephen Grattan 
  To: pianotech at ptg.org 
  Sent: Thursday, October 08, 2009 10:51 AM
  Subject: [pianotech] Stringing question and puzzler for the day


  Hello list,

  I am in the process of tearing an upright piano down to install a pinblock and restring as part of a very extensive rebuild.  I have never seen a pattern of stringing like what I found on this piano. Should I copy it or go to a more traditional pattern?  Also - can you identify the piano?  I know what it is - but it seems like a good puzzle.
   
  Steve Grattan
  Lost Chord Clinic
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20091008/37a08b7a/attachment.htm>