Hi John, The agraffes all out of the plate. I just don't want too much paint to get into the plate's threads and mess up the agraffes alignement when I put them back in. I do use the reamer after buffing the agraffes. Thanks, Marcel Date: Fri, 30 Oct 2009 08:50:04 -0300 From: jrpiano at win.eastlink.ca To: pianotech at ptg.org Subject: Re: [pianotech] plate refinishing Just a thought. How about the reamer from Pianotek, then they would be refaced as well, as the paint removed. John Ross Windsor, Nova Scotia ----- Original Message ----- From: Marcel Carey To: Pianotech List Sent: Friday, October 30, 2009 6:54 AM Subject: [pianotech] plate refinishing I was just wondering what you guys use to cover the agraffes' holes when you refinish a plate. It's been so long that I don't remember. I guess not remembering must be part of the wisdom age. ;-) Marcel Carey Sherbrooke, QC Préparez-vous à profiter de toute une aubaine! Trouvez des offres Windows 7 fantastiques, toutes à un endroit pratique. _________________________________________________________________ Obtenez Windows 7 pour aussi peu que 39,99 $ – étudiants d’établissements collégiaux et universitaires canadiens seulement. L’offre prend fin le 3 janvier : achetez-le maintenant! http://go.microsoft.com/?linkid=9691647 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20091030/9be065e3/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC