Great idea - I knew there was a good reason I've been salvaging all those large flat-headed wood screws from old uprights all these years...... :-) Terry Farrell On Sep 5, 2009, at 8:39 AM, Floyd Gadd wrote: > I've read of a method of levelling grandfather clocks on soft carpet > that > uses flat head screws driven through the carpet into the floor such > that the > heads of the screws are level with the top surface of the carpet. > The clock > sits on on the heads of the screw rather than on the carpet, and > thus is > stable. The screws can be adjusted to achieve a perfectly level > clock. If > this piano has no casters, perhaps its points of contact with the > floor are > large enough that a method like this might work. Trying to balance > casters > on the heads of screw would of course be an exercise in futility. > > Floyd Gadd > Manitoba Chapter
This PTG archive page provided courtesy of Moy Piano Service, LLC