Bill If you?put the iron on the strike point?of the hammer, it will cover an area from about 1-11, which should be sufficient.?You might need to bring it around a little on the smaller hammers. Wim -----Original Message----- From: pianofritz50 at aol.com To: pianotech at ptg.org Sent: Tue, Sep 15, 2009 3:15 pm Subject: [pianotech] Wim: Re your response: Interested in having my Yamaha U1 voiced Wim, you said "Use a linen cloth, like a handkerchief. Make it wet, but not dripping, place it over the hammer, and touch the hot hammer iron to the top of the hammer for about 1 or 2 seconds." ? So?I should?steam only at the strike point?? ? Or do you also so some steaming at 10 & 2 o'clock, or even lower in the shoulder, to give more "give" in the overall hammer when striking the string? ? Thanks...?? Bill Fritz, StLouis/PTG -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090915/19ec069c/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC