[pianotech] VJ Lube

[AAA Piano Works, LLC]

Thanks...what is the desired texture?

-----Original Message-----
From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf
Of Jon Page
Sent: Wednesday, September 16, 2009 7:37 AM
To: pianotech at ptg.org
Subject: Re: [pianotech] VJ Lube

An alternative to VJ LUbe, if lanolin is scarce; is to warm
a container of petroleum jelly in the microwave. Nuke it
in 20 to 30 second bursts and mix in Teflon powder as
the consistency allows until you get the desired texture.
-- 

Regards,

Jon Page