Thank you for the responses. I suspected the same. Kenneth Smith / Registered Piano Technician ----- Original Message ----- From: J Patrick Draine To: pmc033 at earthlink.net ; pianotech at ptg.org Sent: Sunday, September 20, 2009 10:06 AM Subject: Re: [pianotech] Steinway console keys And check the friction in the flanges' bushings too. The small Steinway verticals had billings flanges, and verdigris is certainly possible in the bushings. Patrick On Sun, Sep 20, 2009 at 2:35 AM, Paul McCloud <pmc033 at earthlink.net> wrote: These Steinway consoles are notorious for sluggish keys. Often these keys are too heavily front weighted, and his removing the leads may have helped with keys that didn't return. Now you just have to finish the job. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090920/a4b761ca/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC