Hi, Matthew: I'd cut them so there was a little slack when the hammers are on the rest rail. Bend the bridle wires so they're in a straight line before you begin, and cut the straps the same length. I assume you are using plain straps, not ones with clips or corks. Have fun. Paul McCloud San DIego From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Matthew Todd Sent: Thursday, September 24, 2009 9:17 AM To: pianotech at ptg.org Subject: [pianotech] Bridle Straps When replacing standard bridle straps, how do we measure the original when they are non existent? Thanks! TODD PIANO WORKS Matthew Todd, Piano Technician (979) 248-9578 http://www.toddpianoworks.com <http://www.toddpianoworks.com/> -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090924/cdbcd4b9/attachment-0001.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC