[pianotech] Bridle Straps

[Matthew Todd]

Okay, thanks.
 
Forgot to mention, the piano is a Wurlitzer console.


TODD PIANO WORKS 
Matthew Todd, Piano Technician 
(979) 248-9578
http://www.toddpianoworks.com

--- On Thu, 9/24/09, PAULREVENKOJONES at aol.com <PAULREVENKOJONES at aol.com> wrote:


From: PAULREVENKOJONES at aol.com <PAULREVENKOJONES at aol.com>
Subject: Re: [pianotech] Bridle Straps
To: pianotech at ptg.org
Date: Thursday, September 24, 2009, 4:27 PM



Todd:
 
The general measurement of most standard straps is 3.25"--3.375" from the join at the catcher shank and butt to the bridle wire. G
 

In a message dated 9/24/2009 11:23:22 A.M. Central Daylight Time, toddpianoworks at att.net writes:





When replacing standard bridle straps, how do we measure the original when they are non existent?
 
Thanks!


TODD PIANO WORKS 
Matthew Todd, Piano Technician 
(979) 248-9578
http://www.toddpianoworks.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090924/6703c14a/attachment.htm>