Exactly. I mentioned this before, I did several Yamahas to no avail. I wish I had tried a few samples first...I'll just rebush from now on. David Ilvedson, RPT Pacifica, CA 94044 ----- Original message ---------------------------------------- From: "Dean May" <deanmay at pianorebuilders.com> To: pianotech at ptg.org Received: 4/2/2010 5:12:52 AM Subject: Re: [pianotech] vs profelt >Sounds like it would be less work to rebush the key > >Dean >Dean W May (812) 235-5272 >PianoRebuilders.com (888) DEAN-MAY >Terre Haute IN 47802 > _____ >From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf >Of reggaepass at aol.com >Sent: Friday, April 02, 2010 6:18 AM >To: pianotech at ptg.org >Subject: Re: [pianotech] vs profelt > >Haven't found myself in the particular scenario you describe, but have used >V S Profelt on somewhat worn key bushings, after a light steaming (and, in >some cases, needling of compacted area a la Steve Brady's method), and >followed by cauls of appropriate size overnight. Overkill? maybe, but >effective. >Alan Eder >-----Original Message----- >From: Tom Driscoll <tomtuner at verizon.net> >To: pianotech at ptg.org >Sent: Thu, Apr 1, 2010 12:22 pm >Subject: [pianotech] vs profelt >Listy, > I just received my bottle of VS profelt from pianotek and was wondring if >anyone has had any success in sizing key bushings with this stuff. > I serviced a piano yesterday that had recently rebushed keys and the >cauls used were too big. No wear at all on the cloth and all were >consistantly loose both front and center . > >I don't have the action in the shop yet and I will experiment tonight on >some old keys ,but would also appreciate any feedback from your collective >experience. > It would be nice to not have to rebush . >Thanks, >Tom D.
This PTG archive page provided courtesy of Moy Piano Service, LLC