Hey Terry, Even though that area of the soundboard in your design isn't doing anything, I think I would prefer to see spruce instead of a dark triangle...JMHO...everything looks well done... David Ilvedson, RPT Pacifica, CA 94044 ----- Original message ---------------------------------------- From: "Terry Farrell" <mfarrel2 at tampabay.rr.com> To: pianotech at ptg.org Received: 4/1/2010 12:47:33 PM Subject: Re: [pianotech] pin block inserts >I forgot to add. I like how the dark panel in the cutoff turned out. >The case is veneered in some very nice "flamed" mahogany. I found some >veneers very similar and veneered a piece of plywood for the insert. >Stained it to match the case. >I really like working with the panel with the cut-out part cut off. On >this soundboard I even cut the fish extra off. Just more compact - >easier to rib, etc. - and easier to glue - I can put some nice C- >clamps on the cutoff/panel joint. >Here's how it looks strung. >I guess you could try something different each time till you find a >combo you like! >Terry Farrell >On Apr 1, 2010, at 9:27 AM, David Love wrote: >> Terry: >> >> Which piano is that? I like that look in the bass corner. >> >> David Love >> www.davidlovepianos.com >> >>
This PTG archive page provided courtesy of Moy Piano Service, LLC