Indeed, you are correct. I was just extrapolating my personal experiences. I probably should try to quantify the difference in notch- ability something better. Maybe I'll give it try sometime.... Terry Farrell On Apr 7, 2010, at 12:11 PM, Ron Nossaman wrote: > Terry Farrell wrote: >> Hi Will, >> That Ron guy who responded to your post has a great POWER notcher - >> easy for him to say it's not hard to hand-notch! > > But I didn't say that. It *is* hard to notch. I said it's doable, > but difficult, which is both true and accurate. > > SNIP >> Do they perform as well as the thinner laminations (stability, >> clarity, etc.)? I don't know for sure as I have not ever tested >> side-by-side. They do however seem to work quite well. I also set >> each bridge pin in epoxy (put epoxy in hole and on pin). > > They sure work a lot better than solid maple, and the epoxy in the > hole when pinning helps too. > Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC