[pianotech] X-Ratcheting Counter Bearing Shim

[Barbara Richmond]

I like the word stiction to describe the phenomenon. I think I read it on this list (Ed Foote?) and well...it stuck. :-) 

Barbara Richmond, RPT 
near Peoria, Illinois 

----- Original Message ----- 
From: "Rex Roseman" <rosemanpiano at gmail.com> 
To: pianotech at ptg.org 
Sent: Sunday, April 11, 2010 3:39:03 PM GMT -06:00 US/Canada Central 
Subject: Re: [pianotech] X-Ratcheting Counter Bearing Shim 




Jon 



I am a little fuzzy as to what symptom you are describing as "ratcheting". Could you explain a bit more what you are experiencing that this resolves? 



Thanks. 



Rex Roseman 





-----Original Message----- 
From: Jon Page [mailto:jonpage at comcast.net] 
Sent: Sunday, April 11, 2010 3:10 PM 
To: pianotech list 
Subject: [pianotech] X-Ratcheting Counter Bearing Shim 



(Snip) What I have done before to eliminate ratcheting wires in agraffes is to replace the wire. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100412/f4402d80/attachment.htm>