That must have taken forever! Greg Newell Greg's Piano Forté www.gregspianoforte.com 216-226-3791 (office) 216-470-8634 (mobile) From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Jon Page Sent: Thursday, April 15, 2010 9:39 AM To: pianotech at ptg.org Subject: Re: [pianotech] X-Ratcheting Counter Bearing Shim Did you cut the brass yourself? Bandsaw? Dremel tool with a thin cut-off wheel. I have a chop saw from MicrMark that I will use for production. -- Regards, Jon Page -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100415/74d16d45/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC