http://www.toolkitpeople.com/catalog/detail.asp?cid=5&item=33074&ssid=B6BDD500AAE34299A54B5705B23A2198 This gives you flexibility... David Ilvedson, RPT Pacifica, CA 94044 ----- Original message ---------------------------------------- From: "John Formsma" <formsma at gmail.com> To: pianotech at ptg.org Received: 4/15/2010 8:05:35 PM Subject: Re: [pianotech] tool cases >Well, I agree with Gerald. My primary bag is mostly for tuning. But I used >to carry a Duluth with a TON of stuff in it. Got way too heavy to lug >around. Wheels would have helped, and I'm lazy too ... but I like lighter >weight now. Don't mind walking out to the car. I figure if they called for >tuning, that's what I come for. Anything else involves a trip to the car, >which understandably implies an extra fee. >I still have the Duluth, which has most any tool (or glue) I'll need besides >tuning stuff. Except I have mini-kits for repinning, hammer shank >replacement, etc. (big thanks to Isaac Sadigursky!! Take his classes at >conventions!). I should send pix of the Duluth bag -- it's amazing how much >that will hold when organized to the max. Perhaps I'll do that later. >The primary bag came from Sam's Club, and is designed for a laptop. All my >basic tuning tools are in a smaller bag inside it: tuning lever, strip >mutes, felt wedge mutes, ear plugs, a combo handle, and a thin-shank action >screwdriver (to check action screws in verticals to see if they need >tightened). In the main compartment is an Accufork, hygrometer, Pierce >atlas, RPT invoice book, and pens. Also inside are various technical >bulletins, DamppChaser brochures, a copy of Joe Garret's labor guide (and >Newton's), other various RPT promotional brochures, a Reyburn CyberHammer, >and an adjustable wrench (for bench nuts, but can also be used for adjusting >pedal nuts). Other pockets hold service records, a lightweight multi-tip >screwdriver, flashlight, and lid prop. >Most of what I do for a normal service call can be done with that primary >bag. It's probably about 15 lbs, or perhaps less. If I need any other >regulation tool, pliers, etc., it's usually in the Duluth. But there is also >another huge Duluth bag that holds all the task-specific bags. >-- >JF >On Thu, Apr 15, 2010 at 7:31 PM, William Monroe <bill at a440piano.net> wrote: >> Thanks David, David, David and all the others not named David, >> >> Yeah, I've looked at all these and other suppliers that have similar >> models. It's really this exact case I'm after, with the tool pallets, >> center compartment, and the vertical orientation. WITH WHEELS!! >> >> Lighten up?? Nope, not a chance. I'm a lazy son of gun at heart, and I >> hate making a trip to the car for stuff. I actually bought a smaller >> "essentials only" case for tuning and absolute basics. Hated it. I really >> don't like going back to the car. And I find myself tempted too often to >> not do something that needs doing because it slows me down to go to the >> car. I don't like that. I rarely don't do the thing, but I am less happy >> about it. I want to be happy. This larger kind of case weighs a lot with >> tools, thus my request that I'm looking for exactly this style case WITH >> WHEELS. Weight matters little when it's rolling. I'm actually still using >> the lighter case, and if I can't find a wheeled version of what I'm looking >> for, I'll probably stick with it. My shoulders and back aren't bugging me >> now (I'm not yet 40), but I really don't want to get to the point that I >> have to change kits because they start to hurt. Wheels, wheels, wheels (and >> more tools). ;-] >> >> If anyone ever finds this Jensen case or one identical to it with wheels, >> Please let me know! >> >> >http://www.stanleysupplyservices.com/product-group.aspx?id=10158&pn=216-170 >> >> William R. Monroe >> >> >>
This PTG archive page provided courtesy of Moy Piano Service, LLC