Erwin dip gauge Really like this tool, which we had taken to calling the "Gnome Gavel." For now on, it will carry your name! Alan Eder -----Original Message----- From: Dale Erwin <erwinspiano at aol.com> To: pianotech at ptg.org Sent: Wed, Apr 21, 2010 5:41 pm Subject: [pianotech] Stolen tools Hi All Last month as many heard my Brother Keith Died. The same day his acu-tuner and tool case were stolen. These ended up on E-bay in separate lots. The Tuner is back on but the tools were e sold in spite of our report to the sheriffs. There was a rosewood tuning lever and an Erwin dip gauge which I have shown here on occasion. This tool helps identify them. it resembles a miniature hammer. The acu-tuner has a serial number listed with Sandersons. Would like to have them back if you hear anything. Thanks Dale S. Erwin www.Erwinspiano.com 209-577-8397 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100421/8684a730/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC