While I like Jurgens quite a bit, it did require some chiseling. If Kawai makes one for their pianos, you might want to look at that - just because the hinges are similar - maybe the Kawai unit would require less wood chopping. I installed my Jurgen unit on an 1895 Knabe grand. Terry Farrell On Apr 26, 2010, at 2:51 PM, tnrwim at aol.com wrote: > Al > > Kawai has them, (I had to replace one), but they are for their > pianos, I don't know if they would work on a YC. You might want to > give them a call. > Wim > > > -----Original Message----- > From: Al Guecia/AlliedPianoCraft <AlliedPianoCraft at hotmail.com> > To: pianotech at ptg.org > Sent: Mon, Apr 26, 2010 7:48 am > Subject: Re: [pianotech] Slow drop fallboard hinge for YC > > I called YC and the person I spoke to (I think it was John Chang) > said they don't have them in stock, nor do they sell them. Any ideas > on how I can get a slow drop fallboard hinge for a Young Chang > G-150 would be greatly appreciated. > > Al - > High Point, NC > From: Al Guecia/AlliedPianoCraft > Sent: Monday, April 26, 2010 12:50 PM > To: Pianotech List > Subject: [pianotech] Slow drop fallboard hinge for YC > > I need a slow drop fallboard hinge for a Young Chang. Is this > something you can only get directly from them? > > If so, does anyone have the number for their parts dept? > > Thanks, > > Al - > High Point, NC -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100426/e8f53b6b/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC