Thanks Mario & John D Al - High Point, NC From: mario at pianosinsideout.com Sent: Wednesday, August 25, 2010 7:14 PM To: pianotech at ptg.org Subject: Re: [pianotech] Petrof #14 wire They use European #14 wire, which is .825mm diameter, and the American size (e.g. Mapes) is .838mm or .033". Either will work. Mario Igrec ------------------------------------------------------------------------------ From: Al Guecia/AlliedPianoCraft [mailto:AlliedPianoCraft at hotmail.com] Sent: Wednesday, August 25, 2010 11:36 AM To: Pianotech List Subject: [pianotech] Petrof #14 wire I removed a broken wire from a Petrof vertical. It was stamped #14 wire on the bridge, but I didn't check the wire with a micrometer and I misplaced the wire. Dose anyone know what wire gauge sizes they use? US? Metric? Thanks, Al - High Point, NC -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100826/7103e11d/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC