[pianotech] Flight Case Yuk!

[Terry Farrell]

Hi Joe,

I just replaced the foam in my case. Just tear & scrape it out - you  
don't have to get every little last bit if you will be putting new  
foam in there. Then get yourself some foam, cut it on the bandsaw and  
glue it in. Very easy to do.

Terry Farrell

On Dec 1, 2010, at 11:36 PM, Joseph Garrett wrote:

> HUH?!!! You yankin' my rope? <G>
>
> Joe Garrett, R.P.T.
> Captain of the Tool Police
> Squares R I
>
>
> ----- Original Message -----
> From: paul bruesch
> To: joegarrett at earthlink.net;pianotech at ptg.org
> Sent: 12/1/2010 6:58:37 PM
> Subject: Re: [pianotech] Flight Case Yuk!
>
> If the Vikings can talk our new legislature into a new stadium, you  
> could probably get some of the artificial turf from the old one. The  
> turf was new a year or two ago.
>
> Anon
>
> On Wed, Dec 1, 2010 at 8:37 PM, Joseph Garrett <joegarrett at earthlink.net 
> > wrote:
>
> Does anyone remember Flight Cases? I have one for my 4' 10" Brambach  
> Grand, (if you could really call it that.<G>). This, I suspect was  
> an Anvil Case, although it doesn't have the appropriate insignia(s)  
> stenciled on it. The insides were 2" & 3" foam. There lies the  
> problem. Because of the age, the foam is now turning into this  
> granular/sticky decomposing yuk! I'm going to have to replace it  
> with something. Just wondering if anyone has any experience with  
> such a mess? The bottom & sides, (end to end for the piano), were  
> covered with indoor/outdoor carpeting over the foam. the back/top,  
> (inside)/removable front were, simply exposed foam. Any thoughts?  
> Anyone?
> Thanks,
> Joe
>
>
> Joe Garrett, R.P.T.
> Captain of the Tool Police
> Squares R I
>
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20101202/fdfd95c6/attachment.htm>