and a yes from me too. Al - High Point, NC On Dec 17, 2010, at 12:01 PM, Conrad Hoffsommer wrote: > yup. > > Conrad Hoffsommer > > > > > To: pianotech at ptg.org > From: reggaepass at aol.com > Date: Fri, 17 Dec 2010 12:00:25 -0500 > Subject: Re: [pianotech] FW: [CAUT] M&H hammer recommendation > > When all y'all say "Wurzen," are you referring to Ronsen hammers with Wurzen felt, or something else? > > Thanks, > > Alan Eder > > -----Original Message----- > From: Al Guecia/Allied PianoCraft <alliedpianocraft at hotmail.com> > To: pianotech <pianotech at ptg.org> > Sent: Fri, Dec 17, 2010 1:27 am > Subject: Re: [pianotech] FW: [CAUT] M&H hammer recommendation > > I used the Wurzen on a BB and the customer just loved the tone and power. > > Al - > High Point, NC > > > > On Dec 17, 2010, at 9:18 AM, Conrad Hoffsommer wrote: > > > Friends, > > anyone out there put new hammers on a M&H "BB" from the teens, recently? I'm thinking Wurzen, but not sure there might not be a better match. > > Conrad Hoffsommer > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20101217/3dbc9bbc/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC