Anna, Yours is one version of keyslip and I have serviced many of them in St. Louis - it is an easy one. Some in spinets are not a thick and have to be "manouvered" to the left or right or slightly "bowed" to remove them. Ken Gerler ----- Original Message ----- From: Anna-Luise Messerschmidt To: pianotech at ptg.org Sent: Tuesday, February 02, 2010 8:58 PM Subject: Re: [pianotech] Wurlitzer Spinet key rail removal I have a little Wurlitzer at home and so I thought I take some pics and put them into a tiny clip on how to remove those parts on MY Wurli - don't know if it's the same for yours, but maybe something similar .... here's the link: http://www.youtube.com/watch?v=7b27hjgz24U Hope it helps, Anna -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100202/5b9df16e/attachment-0001.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC