Sorry about that...ignore this post!.... David Ilvedson, RPT Pacifica, CA 94044 ----- Original message ---------------------------------------- From: "David Ilvedson" <ilvey at sbcglobal.net> To: pianotech at ptg.org Received: 2/3/2010 2:28:46 PM Subject: Re: [pianotech] Website Launch >When he starts complaining about the honky tonk sound and could you make it >softer, you'll wish you had convinced him to wait or I would file the hammers before I >would lacquer...certainly worth a try a few notes. Not just removing the cup of the >hammer, a good layer. Let-0ff? Is the blow distance about right? This is not a >soft, ala Steinway hammer to begin with... >David Ilvedson, RPT >Pacifica, CA 94044 >----- Original message ---------------------------------------- >From: jiimialeggio <jimialeggio at gmail.com> >To: pianotech at ptg.org >Received: 2/3/2010 6:04:23 AM >Subject: [pianotech] Website Launch >>Launched my website about a month ago. We finally got it up and running >>on all the browsers. Its been a long but highly instructive haul...The >>writing, re-writing, re-re-writing, re-re-re-re-re-writing of the >>presentation, combined with the organization that we struggled to >>create, took my ideas and really clarified them for me. >> >>I tried taking a slightly different approach to the "sell"...hope it works. >>http://grandpianosolutions.com/ >>Now we get to futz with the optimization... >>Jim I >>grandpianosolutions.com >>978 425-9026 >>Shirley, MA
This PTG archive page provided courtesy of Moy Piano Service, LLC