Greetings, If theres rust back at the damper spring area, perhaps spoons have rust and are sluggsh/snagging on the damper lever. Could explain why action is heavy too. Julia Gottshall Reading, PA I had thought of that, and will check it when I go back. Thanks for reminding me. Wim -----Original Message----- From: KeyKat88 at aol.com To: pianotech at ptg.org Sent: Mon, Feb 15, 2010 4:16 pm Subject: Re: [pianotech] help needed with Hamilton Greetings, If theres rust back at the damper spring area, perhaps spoons have rust and are sluggsh/snagging on the damper lever. Could explain why action is heavy too. Julia Gottshall Reading, PA In a message dated 2/15/2010 8:47:01 PM Eastern Standard Time, wimblees at aol.com writes: This is a 40 year old Hamilton. There are two problems. The action is heavy. Everything is regulated the way it is supposed to be. The only thing I can figure out is that the damper springs are too strong. But that leads me to the second problem. Although each note dampens, there is a general after ring in the whole piano. I can get it to stop by putting my hands on the bass string. What I'm afraid of is if I weaken the damper springs, the after ring will get worse. The damper felts are OK, a little noisy, but nothing unusual. I did have to replace one damper flange because the spring had broken due to rust. Any ideas? -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100215/b998bc50/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC