Maybe, it is fully felted. Nice felt job......very tight fit. Hmmmm Chuck ----- Original Message ----- From: "Ron Nossaman" <rnossaman at cox.net> To: <pianotech at ptg.org> Sent: Wednesday, February 17, 2010 3:14 PM Subject: Re: [pianotech] Petrof music rack > Chuck Vetter wrote: >>I could counter sink some screws from >> underneath.....as long as they are sunk deep enough. The rack scrapes >> pretty hard as it is coming across the stretcher. > > Is there room to get more clearance with a thicker top cloth > strip (bushing) in the desk end dadoes? I hate to see any > stretcher contact if it's avoidable. > Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC