Hi Ursula, I'll chime in on the 'lowered panel' keybed idea, and the possibility that one of the pedal return spring/wooden slats may have broken. They could hang up on either the back rail or balance rail and still allow you to lift and shift. Do all the pedals work properly? -Ben Palmer > > > > *From:* pianotech-bounces at ptg.org > [mailto:pianotech-bounces at ptg.org] *On Behalf Of *Ursula Hammerling > *Sent:* Saturday, 20 February 2010 9:31 AM > *To:* pianotech at ptg.org > *Subject:* [pianotech] help > > > > Hello, > > I very much like an answer to a problem, that I encountered today. > I wanted to open a Premier Baby Grand 4'9" and I stumbled upon a > problem removing > the action. I removed the fall board with cheek blocks attached, > and the key slip. There were no other screws holding the action in > place. I also removed part of the trap work since I thought, that > the broken 'soft' pedal might have something sticking upward to > make removing of the action impossible. I was able to lift the > front of the action up so I could look underneath, whether a screw > might have been drilled through the key bead and so impeding the > removal of the action. There was nothing visible. The bass side of > the action gave way to about 1/8 of an inch, the treble side moved > nothing. (The sustain pedal shifts from right to left). The action > felt like being screwed to the back of the piano. > > Does anybody have an idea what I might have missed? > > Thanks for looking at this. > > > Ursula Hammerling, RPT > > > > > > > > ------------------------------------------------------------------------ > > _______________________________________________ > pianotech mailing list > pianotech at ptg.org > http://ptg.org/mailman/listinfo/pianotech >
This PTG archive page provided courtesy of Moy Piano Service, LLC