Hi Everyone, I worked on a Wurlitzer spinet today and had a question about it. It's a serial # 506984. I'm not sure how to adjust the lost motion on it. The keys are not connected to the stickers, but there is this sticker rail wit screws on it that faced me as I sat at the piano. The adjustment for the lost motion is on the keys themselves. So my question is when I head back in six months to tune it, will I need to remove that rail in order to access the capstens? There isn't enough room to get your finger at the end of the key with that sticker rail in the way because the key sort of slopes down. Thanks Marshall Marshall Gisondi Piano Technician Marshall's Piano Service pianotune05 at hotmail.com 215-510-9400 Graduate of The School of Piano Technology for the Blind www.pianotuningschool.org Vancouver, WA _________________________________________________________________ Hotmail: Free, trusted and rich email service. http://clk.atdmt.com/GBL/go/201469228/direct/01/ -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100220/9666e554/attachment-0001.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC