Hi Garret, The Kimball has a Schwander action with the cord type spring. The dia. is .018. A new regular replacement upright spring is .023. Hope this helps. Go now and sell something. Carlos ----- Original Message ----- From: Garret Traylor To: pianotech at ptg.org Sent: Tuesday, February 23, 2010 8:06 AM Subject: Re: [pianotech] Kimball Console Hammer Return Spring Size Thanks Carlos, Hope you are doing well. Kindest Regards, Garret From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Carlos Ralon Sent: Monday, February 22, 2010 6:56 PM To: pianotech at ptg.org Subject: Re: [pianotech] Kimball Console Hammer Return Spring Size Garret I have a Kimball 80's 42" console in my shop. I can let you know tomorrow the dia of the spring wire. Carlos Ralon, RPT -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100223/75203e1f/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC