Ron If you're thinking of making your own, please reconsider. I didn't make a skid board, but I did make a four wheel dolly once. By the time I bought the wood, casters and bolts, I spent as much as a new one from Schaff. And that did not include the time it took me, or the risk i took getting a tire tread off the highway to use as skids on the dolly. Because I used a steel belted radial, I kept getting stuck with the steel. But getting back to your skid board. Look at what Schaff, Pianotek and Jansen charge. It might be cheaper. Wim -----Original Message----- From: RonLindquist <rrlindquist at peoplepc.com> To: pianotech-ptg.org <pianotech at ptg.org> Sent: Mon, Jul 5, 2010 1:49 pm Subject: [pianotech] Plans for Grand Skid Board Lister's, Anyone have plans for a skid board they can send me or now where I can get them. Thanks, on Lindquist -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100705/679e9041/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC