Years ago I discovered in an old upright a capstan "screw" that had "parallel" ridges rather than "threads". It had to be "pressed" into the end of the key. I replaced it with an "appropriate" capstan screw. Ken Gerler ----- Original Message ----- From: "Ron Nossaman" <rnossaman at cox.net> To: <pianotech at ptg.org> Sent: Monday, July 26, 2010 1:02 PM Subject: Re: [pianotech] freaks of nature > Allen Wright wrote: >> a boxful of either of these could ruin your day... : ) > > Impressive! Would these perchance be of German manufacture, highly revered > for their dependable uniformity? <G> > > I've gotten unthreaded, no hole, hole half way through, hole located 90° > off, but the upside down one is deluxe. > > Were these out of the same box? > Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC