Customer googled 1899 Kimball and found a photo of one for sale... it's definitely the same model... so thanks to all responders! Paul Bruesch Stillwater, MN On Tue, Jun 8, 2010 at 10:25 AM, paul bruesch <paul at bruesch.net> wrote: > I serviced an old upright yesterday that was stripped/refinished (outside > surfaces only) that no longer has a manufacturer name located anywhere on it > (that I could locate, anyhow.) It's definitely an early 20th century model. > > > I'm sure I have seen this "style" of serial number before, but I don't > typically photograph the serNo, so I have nothing to compare it to. I do > have a guess as to mfr, but if anyone can help out, it'd be appreciated. > > Attached are photos of the serial number and the F1 hammer butt/flange > (I'll be replacing flanges and doing other necessary work soon). Butt/flange > photo provided in case the plate screwed into the butt is any help. > > Thanks much, > Paul Bruesch > Stillwater, MN > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100610/3e70cb07/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC