Ron, I thought by some chance somebody might have one lying around that I could get on the cheap. No obvious to it Terry. I will make one. Sometimes it is easy to make the simple complicated. Also, I thought I could get one without the trouble cuz life has filled up my plate quite recently. =). Thanks, Steven HoppMidland, TX From: mfarrel2 at tampabay.rr.com To: pianotech at ptg.org Date: Sun, 20 Jun 2010 18:33:24 -0400 Subject: Re: [pianotech] Key Slip Need At the risk of stating the obvious......... make one. Or have someone make one. Pretty simple - piece of wood, few screw holes, little bevel on one edge...... 4/1..... :-) Terry Farrell On Jun 20, 2010, at 6:24 PM, Steven Hopp wrote:> > I am in need of a key slip for a Steinway M. Any suggestions would be > > appreciated. > > Is it April 1 again already? > Ron N _________________________________________________________________ Hotmail has tools for the New Busy. Search, chat and e-mail from your inbox. http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_1 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100620/f3322510/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC