[pianotech] not for the feint of heart or anything else

[steven stokes]

Gene,

Saw your post.  Do you need any help with this piano?

Steve Stokes
AAA Piano




________________________________
From: Gene Nelson <nelsong at intune88.com>
To: pianotech at ptg.org
Sent: Mon, June 21, 2010 7:08:08 AM
Subject: Re: [pianotech] not for the feint of heart or anything else


Lid is on.
----- Original Message ----- 
>From: Terry Farrell 
>To: pianotech at ptg.org 
>Sent: Sunday, June 20, 2010 11:09 PM
>Subject: Re: [pianotech] not for the feint of heart or anything else
>
>I have flipped grand pianos upside down and then back in my shop using my chainfall. I suppose you want to get your engine puller real stable and so it won't roll anywhere. I just put a strap around a beam and lift the treble end, using the flat side as a fulcrum. Once you get it up half way, then you can put a strap on the plate. But I suppose you will be trying to put it on the dolly. I would think getting the piano up on it's long flat side would be first, and then reposition straps, etc. to lift it the few inches needed to set it on the dolly. 
>
>
>Please tell me the lid is off.....
>
>
>Make sure your insurance is paid up.
>
>
>I have pictures if that would help you.
>
>
>Terry Farrell
>
>
>On Jun 21, 2010, at 12:12 AM, Gene Nelson wrote:
>
>Got a call from a frantic client.
>>Piano fell off of a dolly and is lying upside down and wants me to get involved to right it.
>>It is a 9' concert grand.
>>Will not be able to see it till late tomorrow or Tuesday.
>>I have a portable engine puller and an overhead winch/snatch block mounted on a trailer than is probably usable and it sounds like there is good clearance around the piano for access. Have plenty of straps, blankets and pads.
>>Anyone care to share experience or give advice would be appreicated.
>>Gene
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100621/ecfa82b3/attachment.htm>