[pianotech] repinning rep spring (was: WNG parts with Schaff (Abel) hammers?

[William Truitt]

The back of the post behind the coil is open so there would not be a support
to bear against

 

Will

 

From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf
Of Jon Page
Sent: Friday, June 25, 2010 5:24 PM
To: pianotech at ptg.org
Subject: Re: [pianotech] repinning rep spring (was: WNG parts with Schaff
(Abel) hammers?

 

to try to thread the strip of

bushing cloth inside the coil.

 

Not inside the coil but between the coil and the support post

to press the coil against the spring bushing.

 

i don't have these parts to examine so I'm speculating.

-- 


Regards,

Jon Page

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100625/c917b165/attachment.htm>