Thanks Tom ----- Original Message ----- From: "Michiel van Loon" <mvanloon at pianoman.nl> To: <pianotech at ptg.org> Sent: Friday, June 25, 2010 4:53 PM Subject: Re: [pianotech] Guestion with leather key bushings > Tom, > Just needle the leather softly with a single needle in your voicing > tool. It makes the leather softer and holds very long. > Do not use water on this leather. > > Vriendelijke groeten, > Michiel van Loon > Meppel > 0522 255160 > 06 55150644 > > KvK nummer 04040386 > > > > Tom Servinsky schreef: >> List >> Got a question about the possibiity of sizing leather key bushings. I >> have a Bosendorfer Imperial grand with leather key bushings which are >> in premium condition, however the mortise openings have widened beyond >> being acceptable. >> I hate to replace key bushing leather if they are in prestine >> condition. I'm thinking aboutf using the Alcohol/h2o sizing solution >> to size the mortises as my Plan A attack. >> Your thoughts? >> Tom Servinsky
This PTG archive page provided courtesy of Moy Piano Service, LLC