>Chuck - I know you are a real tool jockie - it's time for you to take the leap and start boring your hammers! It's not that hard, and when somebody makes a mistake, at least you'll know who it is!< Will and Nick - Thanks both of you for the help. Before I do anything, I'm going to take the time to go back through this entire thread to see what I've missed. As to your comment above about boring the hammers myself, Will, I know, I know. After 37 years of doing a lot of this stuff myself, I still get nervous when I try something new. This is on a list of things to try doing that I've been putting off for years. I need to quit making excuses and as you say "take the leap." I'm getting old enough that I'd better be giving some of these things a try. Again, thanks. I'll probably be asking for more advice as I get further into this. Chuck -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100625/009aa88e/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC