And because you might want to recap or resurface & re-notch the bridge for reasons other than the pins being loose. If only half the pins are loose, I still want them all out so I can repair the bridge properly. William R. Monroe On Tue, Nov 2, 2010 at 6:24 PM, Ron Nossaman <rnossaman at cox.net> wrote: > On 11/2/2010 6:12 PM, Ed Foote wrote: > > If they are that tight, why pull them? >> > > > Because they aren't necessarily tight at the surface, and they're still > worn, even if they're tight. > Ron N > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20101102/a3aa9682/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC