If you only have one or two keys to ease, you can do the following: press down the sticking key and its neighbor, stick a metal blade in between the two keys, put sideways preasure on the offender, then repeat on the other side of the key. This can be done on either rail. Be careful if a sharp is involved that you don't pop off the sharp. Gary On Sat, Nov 6, 2010 at 8:16 AM, Mike Kurta <mkurta1 at charter.net> wrote: > Greg: If you are easing the front rail bushing, use 3120 Key easing > plier on page 66 Schaff catalog. If you are easing the balance rail > bushings, the keys have to come out of the piano. > Mike Kurta > -- Doudnas PO Box 68 Baileys Harbor, WI 54202 Doudna440 at gmail.com -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20101106/a4498d94/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC