[pianotech] Key easing question

[David Love]

Keys don't need to come out to ease balance rail bushings.  The balance rail
hole maybe, but not the bushings.  

 

David Love

www.davidlovepianos.com

 

From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf
Of Mike Kurta
Sent: Saturday, November 06, 2010 6:17 AM
To: pianotech at ptg.org
Subject: Re: [pianotech] Key easing question

 

    Greg:  If you are easing the front rail bushing, use 3120 Key easing
plier on page 66 Schaff catalog.  If you are easing the balance rail
bushings, the keys have to come out of the piano.

    Mike Kurta

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20101106/4b048442/attachment.htm>