[pianotech] ringing dampers

limhseng at gmail.com limhseng at gmail.com
Fri Nov 12 23:17:29 MST 2010


U2>30 yrs . It could be hammer to string contact. I have done a few and it helps. Not sure about the single bass strings though. Most grey market U series have this problem.  

Lim
Sent from my BlackBerry Wireless Handheld 
Powered by Gee! from StarHub

-----Original Message-----
From: tnrwim at aol.com
Sender: pianotech-bounces at ptg.org
Date: Fri, 12 Nov 2010 23:58:21 
To: <pianotech at ptg.org>
Reply-To: pianotech at ptg.org
Subject: [pianotech] ringing dampers


Piano: Yammy U2, 20 years old. On a sharp release, F#1 - A#1, F#2 - A#2, F#3 - A#3 dampen, but not completely, AND, there is a high pitched sound, probably a high overtone, but I don't know which pitch. All the parameters for dampers are correct. 

I just replaced all the hammer flanges with new spring cords. The student likes the way the piano plays, but is now complaining about the additional noise from the piano. Perhaps she never noticed before, (I didn't when I tuned it four weeks ago), so she thinks it is related to the new flagnes. 

HELP!!!

Wim


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20101113/95144779/attachment.htm>


More information about the pianotech mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC