Dittos to both. Freeze the keys and it should mostly come off, then scrape (I would probably use a medium thickness card scraper) then sand/buff with compounds as necessary to remove any scratches. William R. Monroe On Mon, Nov 15, 2010 at 11:11 AM, John Ross <jrpiano at eastlink.ca> wrote: > I wouldn't use heat to melt it, that would cause the wax to migrate into > the key further. > Just use a razor blade, and scrape. > John Ross > Windsor, Nova Scotia > > On 2010-11-15, at 10:35 AM, toddpianoworks at att.net wrote: > > Hey everyone, > > I've got a client who's spilled candle wax on their keys and didn't notice > it before it hardened. > > I'll be going over later, but I wanted to see if anyone has had a similiar > scenario. > > I was going to lightly run a lighter over to melt the wax on the tops of > the keys. Then remove those keys and take a sharp chisel to the > keysticks/frame/bed and just replace the punchings. > > Does anyone have any other ideas? > > Thanks! > Matthew > Sent from my Verizon Wireless BlackBerry > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20101115/e9a9c7a2/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC