A drop of thin CA glue at the joint will take care of it and still allow for easy enough removal. David Love www.davidlovepianos.com From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Noah Frere Sent: Thursday, November 18, 2010 6:44 PM To: pianotech at ptg.org Subject: [pianotech] Loose Let-off Buttons There is a possibility that this 1989 Weber Grand's let-off buttons are slipping, since 1) they are very loose, and 2) supposedly the hammers began blocking more than once not long after regulations. This is the first time I've seen the piano, so I put a pencil mark in the center of the let-off buttons to check their possible movement when i return in 3 months. If they do move, is there a way to tighten them up, like Loctite or something? Otherwise they will have to be replaced. At least the buttons themselves, if not the metal thread. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20101118/f6133022/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC