Floyd, Thanks! I believe those were the articles I was looking for. Time flies. Thanks, also to Jon and William. I've got several different options to consider now. John Voigt -----Original Message----- From: Floyd Gadd [mailto:fg at floydgadd.com] Sent: Monday, November 22, 2010 10:03 PM To: pianotech at ptg.org Subject: Re: [pianotech] old finish restorer Hi John, The articles were a little farther back - October and November 2004 in the Journal. Fast & Effective Finish Restoration by Perkins and Beasley. Varnish & Polymerized Tung Oil Overcoat. I tried it this summer on a badly deteriorated finish. I was pleased. I think I'll get quite a bit of use out of the process. Floyd Gadd Manitoba Chapter I thought I had read an article in the Journal in the last two years about using some concoction containing turpentine to rejuvinate an old finish. I have looked through my old issues back through 2007 and could not find the article. Am I mistaken or have I just overlooked it? If anyone could give me a brief explanation of such a process or, better yet, the location of that article, I would appreciate it. Thanks! John Voigt, RPT
This PTG archive page provided courtesy of Moy Piano Service, LLC