Lock-n-stich. Only way to fly. They are located in Turlock, Calif. 15 miles down the road from me. Talk to Gary. Dale S. Erwin www.Erwinspiano.com Custom piano restoration Ronsen piano hammers-sales R & D and tech support Sitka soundboard panels 209-577-8397 209-985-0990 -----Original Message----- From: Terry Farrell <mfarrel2 at tampabay.rr.com> To: pianotech at ptg.org Sent: Tue, Nov 30, 2010 7:45 pm Subject: Re: [pianotech] Plate Repair Let your fingers do the walking? 1-800-JUNK. Terry Farrell On Nov 30, 2010, at 10:15 PM, Dennis Roberts wrote: Hello all. Today the plate on a 1904 Haines Bros. Upright broke. It snapped through on the right hand strut at the top where the strut meets a bolt hole as a horizontal break. It broke through the bolt hole. It is in the bottom-most part of the pin field at the lower edge of the plate. There is material on either side of the hole, enough to repair if repair is possible. What can I do? Thanks, Dennis = -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20101201/8bb7341d/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC