William Now, when you say nose bolt, are you talking about the nut that tightens the bolt to the plate? Or are you talking about the bolt that goes down into the beam and up through the plate? For the former, heat will loosen it. For the latter, drop some oil down on the beam next to the bolt, and allow it to soak it. What tool are you using to loosen it up with? Wim -----Original Message----- From: Piano Boutique <pianoboutique at comcast.net> To: pianotech <pianotech at ptg.org> Sent: Tue, Oct 19, 2010 9:52 am Subject: Re: [pianotech] Frozen nose bolt question, Wim, Thanks so much for responding, I think it is just age, and it is too tight. I thought if I heated it, what ever way, it would expand the metal. It is an 1861 piano and this is probably the first time it has been taken apart, so I am thinking it is just plane too tight. William ----- Original Message ----- From: tnrwim at aol.com To: pianotech at ptg.org Sent: Tuesday, October 19, 2010 1:58 PM Subject: Re: [pianotech] Frozen nose bolt question, William Why is the nose bolt frozen? Rust, too tight, put on crooked? Have you tried heating it? Wim -----Original Message----- From: Piano Boutique <pianoboutique at comcast.net> To: pianotech <pianotech at ptg.org> Sent: Tue, Oct 19, 2010 7:41 am Subject: [pianotech] Frozen nose bolt question, O Wise Group, Like the subject line announces, I have a frozen nose bolt and I don't want to harm it. I think we have covered this subject before, but you know the drill: I didn't pay it any mind, because it wasn't happening to me. Now it is and I would appreciate any suggestions for the right product to loosen it up. William Benjamin RPT www.pianoboutique.com piano tuner extraordinaire The tuner alone, Preserves the tone. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20101019/4abe1a63/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC