Yes, the Everett needs a 7/32", unless a screwdriver has rounded it out. Some sort of pliers at that point. The small nest of wrenches doesn't usually get that big. Conrad Hoffsommer > From: da88ve at gmail.com > To: pianotech at ptg.org > Date: Wed, 20 Oct 2010 19:34:38 -0600 > Subject: Re: [pianotech] which Allen wrenches to carry > > 3/16" might work on Everett lids, but I just measured the > one I use and it looks more like 7/32". I've seen Vise-grips > marks on Everett lid screws when janitors didn't have the right > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20101020/8dd5c245/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC