I was afraid of that answer. Lol. I kind of thought that if they were compressing on themselves they would be too weak. And being a grey market, I'm not too surprised. Ah, well. I'll throw the suggestion out there and see what the customer wants. Thanks again! Barb Nobbe -----Original message----- From: Tom Driscoll <tomtuner at verizon.net> To: pianotech at ptg.org Sent: Fri, Oct 22, 2010 17:55:57 GMT+00:00 Subject: Re: [pianotech] Noisy jack springs on a vertical Subject: Re: [pianotech] Noisy jack springs on a vertical Tom, Thanks. I'll try that. And, you may be right. The coils could be compressing on each other causing the metallic "chinging". In which case, what can be done in that situation? Barb Nobbe, RPT Replace the springs. Tom D. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20101022/c12e016e/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC