What do you mean? How do you center it in the balancier window? You accomplish that by slightly bending the center pin that holds the jack in place. To do that you set the side of the wippen foot adjacent to the center pin on the edge of a hard surface (like a bench vise) so that the vise supports only the foot and not the jack itself. Then tap on the top of the jack lightly with a small hammer to bend the center pin. The jack will move in the direction of the side being supported. David Love www.davidlovepianos.com -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Richard Ucci Sent: Wednesday, October 27, 2010 3:13 PM To: pianotech at ptg.org Subject: [pianotech] Steinway flys How do u adjust the fly? Shim? Rick Ucci/ Ucci Piano www.uccipiano.com
This PTG archive page provided courtesy of Moy Piano Service, LLC