Great post Dave! I was thinking the same thing. I have found it amazing how easy a piano will slide on hardwood if it is on a pad. I've used the felt bottomed hardwood caster cups from Schaff for the same purpose. So I'm with you - if the rug doesn't have one of those sticky rubberized bottoms it will probably work fine. And I agree that the stronger person will be wanting to pull on the carpet. On Wed, Oct 27, 2010 at 8:08 PM, David Stocker <firtreepiano at hotmail.com>wrote: > It is simply a question of friction. If the pad will slide, why not? I > think they would find it better to have the husband on the carpet rather > than on the piano. I would do it, with maybe two or more people pulling on > the rug, and one more pushing on the piano to make sure it follows. If there > is too much friction, it won’t work anyway, and you’ll need to follow > other’s advice about rolling up the carpet. > > If protecting the floor is the main issue, I have done it using a folded up > moving pad under each castor and sliding the piano in place. Failing that, a > few folded up towels work. > > If it is only going a few feet across a smooth floor, I don’t understand > what kind of damage to the piano everybody is expecting. If the leg bolts > are tight, a Yammy GC1 is not likely to have the legs folding up from > rolling on hardwood. > > David Stocker, RPT > Tumwater, WA > > > *From:* Barbara Richmond <piano57 at comcast.net> > *Sent:* Wednesday, October 27, 2010 14:11 > *To:* pianotech <pianotech at ptg.org> > *Subject:* [pianotech] Pushing a piano and rug on a wood floor > > > How come I get the weird questions? > > The customer has a Yamaha GC1 that is on a fancy area rug--with a pad > underneath, I assume. The room has hardwood floors and the piano/rug combo > are in the middle of the room. The holidays are coming and she wants to > move the piano/rug combo over to one side so there is room for the Christmas > tree. She was wondering if her husband pushed on the piano (without > standing on the rug, of course) and she pulled on the rug, if that would be > an acceptable way to move it. I'll admit, my dining table is on a rug & > pad on a wood floor and I can move the combo, even though it has a cast iron > base and is heavy. But it's a table, not a piano. > > Has anyone heard of doing this? > Has anyone done this? > Has anyone had to fix the results of someone doing this? > > I suppose it would work if they lifted up enough of the rug so people--that > is multiple persons--could be around the piano to make the move. > > I just need a little reassurance here. > > Thanks, > > Barbara Richmond, RPT > near Peoria, Illinois > > > > > > > > -- Ryan Sowers, RPT Puget Sound Chapter Olympia, WA www.pianova.net -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20101028/4bcc05f9/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC