Got one in the shop right now getting a new soundboard. You either leave them alone or grind them off and install small diameter brass half rounds that you can shove back up against the hitch pins or grind them off and install vertical hitches. David Love www.davidlovepianos.com -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of James Grebe Sent: Wednesday, September 01, 2010 4:27 AM To: Pianotech Subject: [pianotech] Fw: Fw: Fw: Steinway duplex scale This is for Dale Erwin James Grebe Est. 1962 Piano Tuner-Technician Creator of Custom Caster Cups Creator of fine Writing Instruments Pump Organ & Plyr Piano benches Table Timepieces Theatre and Theatre Organ Historian www.grebepiano.com 1526 Raspberry Lane Arnold, MO 63010 (314) 608-4137 Become what you believe ----- Original Message ----- From: "James Grebe" <jamesgrebe at charter.net> To: "Pianotech" <pianotech at ptg.org> Sent: Monday, August 02, 2010 8:03 AM Subject: [pianotech] Fw: Fw: Steinway duplex scale >I cannot believe that I am the only tuner in the world that has run into >one > of these. How about it? > James > >> >>> Hi, >>> >>> I may have asked this before. This is one of several Steinway (O)'s I >>> have come across that instead of the duplex aliquots in the top 3 >>> sections >>> of strings they have a regular raised bars instead. The rest of the >>> scaling >>> is normal. Do you know why they tried this for and how long and how >>> many >>> years they tried this. This one is from 1906 >>> >>> Jim >>> James Grebe >>> Piano Tuner-Technician, Est1962 >>> Custom Hardwood Caster Cups >>> Custom Writing Instruments >>> Pump Organ and Plyr Piano Benches >>> Table Timepieces >>> Theatre Organ Historian >>> 1526 Raspberry Lane >>> Arnold, MO 63010 >>> (314) 608-4137 >>> www.grebepiano.com >>> >> >
This PTG archive page provided courtesy of Moy Piano Service, LLC